A320CFM56
B1 · T1B2 · T2
Airbus A318/A319/A320/A321
A320-family configuration with CFM56 engines.
Explore mechanical and avionics category requirements.
Part-147 · Aircraft type training
Technical knowledge.Maintenance confidence.
A clear route to aircraft maintenance type training. Explore our B1 and B2 approval scope, understand examinations, and prepare your team’s training requirements.
Explore approved scope →Approval certificate · PDF coming soon
CY.147.007
Approval reference
B1 & B2
Type/task ratings in the schedule
3 combinations
Aircraft and engine configurations
Cyprus
Locations listed in the approval
Overview · 1 min 24 s
How it works,in 84 seconds.
Who holds the approval, the three aircraft and engine combinations, the four steps of a course, where training takes place and what to send us. Narrated, with English captions.
01 / Approved training scope
Choose the aircraft.Define the training.
Aircraft and engine combinations reproduced from the approval schedule. Select a category to explore its technical focus.
A320IAE V2500
B1 · T1B2 · T2
Airbus A319/A320/A321
A319, A320 and A321 configuration with IAE V2500 engines.
Explore mechanical and avionics category requirements.
737 NGCFM56
B1 · T1B2 · T2
Boeing 737-600/700/800/900
737 Next Generation configuration with CFM56 engines.
Explore mechanical and avionics category requirements.
The schedule records B1 / T1 and B2 / T2 under TYPE/TASK. Exact course privileges, theoretical/practical elements, differences courses and delivery arrangements must be confirmed against the approved MTOE/AAA scope. A listing here is not a scheduled course offer.
02 / The training pathway
From training needsto documented achievement.
A planning guide for maintenance managers and nominated trainees. The final course programme and administrative process are confirmed by AAA Cyprus before enrolment.
- 01 / Define
Confirm the requirement
Identify the aircraft/engine combination, B1 or B2 category, existing qualifications and intended licence outcome.
- 02 / Prepare
Agree the programme
Obtain the approved course specification, entry requirements, timetable, training elements, venue and written quotation.
- 03 / Complete
Train and demonstrate
Complete the agreed learning programme and required examinations. Where included and approved, complete practical training and assessment.
- 04 / Document
Plan the next step
Check the Certificate of Recognition covers the completed elements. Discuss any remaining licence, OJT and employer authorisation requirements with the relevant parties.
03 / Examinations & assessment
Know what is being assessed.
Theoretical examination
Checks the aircraft type knowledge taught in the theoretical programme. EASA distinguishes this written knowledge examination from a practical competence assessment. The applicable course specification must identify examination sections, format, duration and pass criteria.
Practical training and assessment
Where applicable to the confirmed programme, practical learning develops maintenance competence. Assessment considers knowledge, skills and attitude in relevant tasks. Confirm the practical element’s approval, task coverage, facilities and assessment arrangements before booking.
Results and certification
Ask how results are notified, what happens after an unsuccessful attempt and which training elements are recorded on the Certificate of Recognition. A course certificate does not itself amend a Part-66 licence or grant company certification privileges.
Candidate briefing checklist
Before examination day
- Confirm candidate identity and registration details.
- Obtain the examination venue, reporting time and timetable.
- Read the issued candidate instructions and permitted-material rules.
- Confirm attendance and eligibility requirements.
- Raise accessibility needs before the event.
- Understand conduct rules, results notification, resits and review channels.
These are briefing topics, not a reproduction of AAA Cyprus’s approved examination procedure. The organisation’s issued instructions govern the event.
Which examination standard applies?
EASA’s guidance separates examinations conducted within aircraft type training from the “type examination” route that can substitute for training for certain other aircraft groups. For the aircraft listed on this page, request the applicable approved type-training specification; do not assume that a standalone examination replaces the training programme.
How are pass marks, resits and appeals handled?
The regulatory standard and approved course/examination procedures determine assessment requirements. AAA Cyprus must confirm the applicable pass mark, examination section rules, waiting periods, permitted attempts, fees, result-review process and complaint channel in the candidate briefing. The approval certificate does not contain these details.
Does practical type training include OJT?
Practical type training and on-the-job training (OJT) are distinct. Additional OJT may be needed for a first type endorsement in the relevant category/subcategory. Confirm your individual route with the licensing authority and any OJT provider; this website does not represent AAA Cyprus as an approved OJT provider.
Regulatory reading: EASA: type ratings and examination versus assessment ↗ · EASA: type-training guidance ↗
04 / For airlines & maintenance organisations
A better preparedtraining enquiry.
Give your training coordinator the information needed to scope a programme. Request a written proposal before making travel or staffing commitments.
Information to include
Aircraft and licensing objective
Aircraft variant, engine, target category, existing type ratings, issuing authority and whether this is a first type endorsement.
Team and timing
Number of trainees, relevant experience, preferred dates, language needs and operational constraints. Confirm required prerequisites and supporting documents.
Delivery and commercial needs
Requested theory/practical elements, preferred location, invoicing entity, procurement requirements and any requested accommodation or logistics support.
Request these before booking
- Course title, category and approved element coverage.
- Detailed syllabus, duration and daily training hours.
- Confirmed dates, venue, delivery mode and training language.
- Entry criteria, required documents and attendance threshold.
- Examination, practical assessment and resit arrangements.
- Price, taxes, included materials and payment terms.
- Cancellation, postponement and refund conditions.
- Certificate scope, issue process and follow-up contact.
Availability, duration, class capacity, online delivery, off-site training, fees and commercial terms are not established by the approval certificate. They require a confirmed proposal.
05 / Approval & transparency
Clear scope.Traceable approval.
Airboss Aviation Association Cyprus Ltd is named in the maintenance training and examination organisation approval certificate issued by the Cyprus Department of Civil Aviation.
The certificate states compliance with Section A of Annex IV (Part-147) of Regulation (EU) No 1321/2014, subject to its conditions and the approved exposition.
Approval certificate · PDF coming soon
- Approval
- CY.147.007
- Competent authority
- Cyprus Department of Civil Aviation
- Certificate issue / revision
- 20 March 2026 · Revision 00
- Approval schedule
- Original issue: 04 September 2025Last revision approved: 11 March 2026Issue 01 Rev 00
- Exposition reference
- MTOE/AAA
- Validity conditions
- Continuing compliance with Part-147 and the approved exposition; subject to surrender, supersession, suspension or revocation.
AS SHOWN ON THE APPROVAL CERTIFICATE · LAST REVIEWED OCTOBER 2026
This page reflects the approval certificate, not a live authority-status check. Approval is limited to the scope of work in the approved MTOE. Basic training, basic module examinations, other aircraft types and additional services are not claimed on the basis of this certificate.
Locations in the approval schedule
Based in Cyprus.
Larnaca / Head office
Airboss Aviation Association Cyprus Ltd
1 Alpeon Str.Aradippou Industrial & Commercial Estate, 7105Larnaca, CyprusLimassol / Listed location
Frederick University (FRED-UNI)
18 Mariou Agathaggelou StreetAgios Georgios Havouzas, 3080Limassol, CyprusThe schedule lists these addresses. The location for each course or examination must be confirmed in the joining instructions.
06 / Plan your training
Start with yourteam’s requirements.
Create a structured enquiry for your procurement or training coordinator. The form opens it as an email to AAA, ready to review and send.
info@aaaeasa.com